WOPV series treatment is mainly printed on the top layer of PVC decorative film, decorating paper and others, to meet the functional requirement in glossiness, feeling and scratch resistance.
Product features
• Water-based product, eco-friendly, can be both printed or coat
• With an elegant visual effect on matt surface
• Good resistance to wiping by alcohol(can be wiped more than 20 times)
• Have excellent rebound, ductility and anti-cracking performances
• With soft, elastic and velvety feeling
• Excellent dirt-resistance ability, no marks after written, cigarette ash removed easily
• Excellent adhesion performance to PVC film and decorating paper, good scratch resistance and trace recovery function
Key performance indicators
♦ WOPV series divided into main agent(WOPV for short, same as follows) and enhancer with individual packing.
♦ Main agent is milky white liquid, enhancer is in transparent color same as water.
♦ Viscosity of main agen:15-30s/Zahn 3# Cup(25 'C)
♦ PH value:7-9
♦ Addition amount of enhancer: 3~5% (weight percentage to main agent)
| ITEM# | PRODUCT CHARACTERISTICS | OPERATING REQUIREMENTS |
| WOPV-fogging base coating | Suit for double sides printing or base coating | Use enhancer with main agent |
| WOPV-fogging tactile | Velvet feeling, super matt glossiness | Use enhancer with main agent |
| WOPV-fogging anti-fingerprint | Super low bright speck, excellent performance of anti-scratch | Use enhancer with main agent |
| WOPV-fogging anti-fingerprint | Super low bright speck, excellent performance of anti-scratch, anti-fingerprint | Use enhancer with main agent |
| WOPV-fogging anti-scratch shine | Shine, good performance of anti-scratch | Use enhancer with main agent |
| WOPV-fogging anti-scratch semi-matt | Semi-matt, good performance of anti-scratch | Use enhancer with main agent |
Suggestions for using
• Main agent should be used with the enhancer to achieve to the best expect effect.
• We suggest the mixture proportion of main agent and the enhancer is 100:3-5. Add the curing agent before using, or will let the main agent gelatinized gradually. Use up(suggest to use up within 24h) and clean the printing equipment to avoid damages due to drying and blocking problems.
• Better to use 140-180 mesh roller plate to print for twice to achieve the best effect.
• After printing, it needed to be placed and maintained at normal temperature (more better if can in temperature of 50-60'C) of 48h to achieve the best performance, then do coating tests and lamination.
• Due to different printing conditions of drying channel temperature, air volume and exhaust system, we suggest to keep a print speed of 15-30m/min. lake non-stick and no shedding as judging standard.
• Warranty period of main agent and enhancer is 6 month at room temperature(DO NOT store below zero'C). After long time storage, the main agent will be slightly stratified which is normal phenomenon. Full stir of main agent mixing with enhancer and then filter with 150 nylon mesh before using.
• DO NOT add any diluent or water except the main agent and curing agent during processing.
